Wheel loaders KL36.8 - COMFORTABLE AND EFFICIENCT APPLICATION
The KL36.8 wheel loader of the Premium 8 Series range by Kramer sets new standards in terms of efficiency, performance and comfort. The efficient drive system and the four operating modes (Power, Eco, Road, CSD) enable the individual operational settings in all work situations. As a result, the application can be performed as best is possible in the most cost-effective and efficient manner. With this machine, the one-piece frame also provides a high level of stability and great maneuverability.
Wheel loaders KL36.8
Benefits at a glance
- Fuel savings: The correct selection of the four driving modes (Power, Eco, Road, CSD) can save up to 10% fuel
- Automatic load stabilizer: The dampening of vibrations in the lifting frame ensures a high degree of operational comfort
- ecospeed transmission: The optional ecospeed transmission enables continuous acceleration from 0 km/h to 40 km/h
- Smart Attach: The fully-hydraulic quickhitch plate, installed as standard, makes it possible to comfortably hitch up hydraulic attachments without needing to exit the machine
- Comfortable cabin: With entry on both sides, as well as extensive glazing for the best 360° visibility
Highlights
Assistance systems
- The vehicle is equipped with various assistance systems
- Simple and convenient operation, even for inexperienced drivers
- Examples: Angle indicator for attachments in the display, bucket and loader feedback
Operating modes
- The operator can select between different operating modes: Power, Eco, Road, and CSD (Constant speed drive)
- The right driving setting can be selected for any application by simply pressing a button
- Maximum economic efficiency with up to 10% fuel saving combined with maximum operator comfort with effective noise reduction
Smart Attach (fully hydraulic quickhitch system)
- Coupling of hydraulically driven attachments with the automatic connection of the hydraulic circuit, without the need to get out and in
- Increased productivity as a result of cost and time savings
- Attachments changed within seconds for full flexibility
Entry and exit from both sides
- Increased safety thanks to entry and exit on the side facing away from traffic
- Increased flexibility thanks to access from both sides
7" LCD display
- All relevant machine data at a glance summarised on the display
- Operating and setting the machine’s parameters easily and intuitively using the jog dial
- Safe jog dial operation possible, even when driving
Further Highlights
All-wheel steering
- High stability even at full steering lock thanks to the undivided frame
- Maximum maneuverability thanks to steering angles of up to 40° on both the front and rear axles
- Consistent payload independent of the steering angle for constant leverage ratios
One-piece vehicle frame
- High stability, even on rough terrain
- Constant payload due to the constant leverage ratios. Independent of the steering angle, the payload always remains the same
- Great maneuverability due to the high steering angle. Therefore, some steering movements are superfluous, and travel and cycle times are reduced
Two-circuit pneumatic brake system
- Pneumatic braked trailers can be towed on the road
- Enables use of the vehicle’s maximum approved trailer load
Color-coded switches
- Uniformed color scheme for hydraulic, electric, driving, and safety features
- Increased safety due to minimized danger of mixing up switches
- Operating concept that reaches across all models to simplify the handling of the fleet
Front axle steering
- Safe and familiar road travel at high speed
- Precise guidance of special attachments
- Easy maneuvering in trailer mode
EC tractor approval
- Application as a towing vehicle for trailer transport with material
- No restrictions regarding the loads alongside the separate attachments
- It is possible to travel on the road with an attachment subject to the legal provisions
Crab steering
- Easy maneuvering in confined spaces
- Gentle driving on sensitive surfaces
- Simple control in combination with special attachments
Hydraulic two-circuit trailer brake
- Hydraulic braked trailers can be towed on the road
- Even older trailers with a hydraulic one-circuit brake can be used (downwardly compatible)
- Enables use of the vehicle’s maximum approved trailer load
Panoramic cabin
- Everything in view - A panoramic front windshield far to the rear with narrow cabin pillars ensure for an optimal view of the attachment at any time with an extended view upwards
- The operator also has a particularly good view of the attachment, even with a maximum stacking height
- High degree of work quality and safety as the work area can be optimally viewed
Low-speed device and hand throttle
- Easy operation of attachments that are operated with a constant rpm and a simultaneously low travel speed
- Engine rpm and travel speed can be set individually
- Maximum productivity and a best-possible work result, even on long working days
Auto-stop
- Automatic switch-off of the diesel engine after a preset time
- Saving of fuel and reduction of CO2 emissions
- Protection of the environment and machine components
ecospeed: Variable hydrostatic overdrive transmission
- Variable acceleration without interruption to the tractive force or gear-shifting from 0 km/h to 40 km/h
- Full pushing power and tractive force in all work situations
- Maximum efficiency and low fuel consumption as a result of the optimal interplay between the engine and drive train
Gear pump with LUDV
- Load-independent flow distribution with load-sensing characteristics
- It is possible to operate several hydraulic functions at once
- Fast loading cycles and more efficient motion processes increase productivity
Easy maintenance access
- Easy access to the engine compartment thanks to the wide-opening hood
- Optimum accessibility of all important components for checking fill levels
- Quick implementation of service work thanks to vertically mounted filters and additional maintenance openings
Automatic central lubrication system
- Longer service life and value retention of the machine thanks to automatic lubrication of all lubrication points
- Time and cost savings thanks to low and bundled maintenance of the centralized lubrication system
- Optimum lubrication thanks to adjustable time intervals and grease quantities
Automatic bucket return
- The automatic bucket return is ideal for loading work that repeatedly necessitates a particular bucket position
- The desired position can be individually set and stored
- Safe and fatigue-free working as a result of the automatic motion processes. The charge cycles are becoming clearly more efficient
Smart Steering
- Speed-independent steering support.
- The required rotations of the steering wheel at low travel speeds are significantly reduced. Greater steering angle per steering wheel rotation.
- Fast turning maneuvers and reduced effort increase productivity and enable quick maneuvering.
Two-layer paintwork on the axles
- Excellent protection against corrosion
- The axles are clearly more robust and durable
-
Please note that the product range may vary depending on the country.
-
The technical data of the products may vary accordingly with the selection of different options.
